The tools behind every piece

I started with a small handheld engraving pen. It taught me a lot, but a pen can only do so much. To do justice to the photographs people trust me with, I invested nearly £7,000 in professional-grade equipment built for detail. Here's what's in the studio, and why it matters to your piece.

The laser: xTool F2 Ultra dual laser

The heart of the studio is an xTool F2 Ultra. Inside one enclosed machine it has two separate lasers, and I use both on wood and slate.
60W
MOPA fibre laser.
This has an exceptionally fine beam, about 0.03mm across. That’s what lets me pick out the smallest details: a glint in an eye, single whiskers, the texture of hair and feathers. Its pulse and frequency can be finely controlled, so I can decide exactly how each tone sits on the surface.
40W
Blue diode laser.
A powerful blue-light laser with a slightly broader beam, brilliant for the warm, rich tones of birch and for building depth in larger areas of an image.
Having both in one machine means I can choose the right laser for each piece, and each part of a picture, rather than making one tool do everything.

Built-in cameras

Two 48-megapixel cameras inside the machine let me see your slate or birch on screen and position the image precisely. That matters with natural slate, where every piece is a slightly different shape.

Fully enclosed

The laser works inside a closed, light-shielding cover with a fire safety stop, so everything happens safely inside the machine.

Inside the studio

The equipment behind every portrait

Nearly £7,000 of professional equipment, chosen for fine, lasting detail on Welsh slate and birch.

  • 01 xTool F2 Ultra

    60W MOPA fibre laser

    A beam just 0.03mm wide picks out eyes, whiskers and the finest strands of hair.

  • 02 xTool F2 Ultra

    40W blue diode laser

    Builds rich, warm tone in birch and depth across the larger areas of an image.

  • 03 xTool F2 Ultra

    Dual 48MP cameras

    Let me place every image precisely, even on naturally riven slate where no two pieces match.

  • 04 xTool F2 Ultra

    Fully enclosed & fast

    Light-shielded, with a fire safety stop. Up to 15,000mm/s across a 220 × 220mm bed.

  • 05 xTool Studio

    Laser software

    Where I position your image, preview the job and fine-tune power, speed and passes for each material.

  • 06 xTool SafetyPro AP2

    Clean air

    Six layers of filtration and 36 cyclones remove smoke, dust and odour as I work, quietly at around 55dB.

0.03mmFinest beam
2Lasers in one
6Filter layers
£7kInvested

The software: xTool Studio

Every design is prepared and sent to the laser through xTool Studio, xTool’s own software for its machines. It’s where I place your image on the material, preview the job and fine-tune the settings: the power, speed and number of passes for each laser.
That fine control is where experience comes in. Slate and birch behave very differently, and knowing which settings bring out the best in each is something I’ve learned piece by piece.
Before anything reaches xTool Studio, I prepare your photograph separately. When a piece needs a scene built around someone, like a pet with a favourite toy, I use AI tools to help compose it. Then I turn it into a greyscale image, which is the palette the laser works with. You approve that image before anything is engraved.

Clean air: xTool SafetyPro AP2 air purifier

Lasering wood and stone creates smoke and fine dust, so the studio runs an xTool SafetyPro AP2 air purifier alongside the laser.
It draws fumes straight from the machine through six layers of filtration, using a “SuperCyclone” system to separate out the larger particles first. It’s designed to remove dust, fumes and odours so the air in the workshop stays clean, and it runs quietly at around 55 decibels. It’s better for me, better for the environment, and it means your piece is made in a clean, well-looked-after workspace.

The materials and the finish

Welsh slate

Dark, naturally riven stone. The engraving shows pale against it, and no two surfaces are ever the same.

Birch, 3mm and 5mm

Smooth and pale, with a grain that runs through the picture and becomes part of it. Every birch piece is finished by hand with Danish oil, which soaks in, warms the tone and seals the engraving.

Glass

Lead-rimmed, frosted pieces for the Christmas collection.

The machine is only half of it

Close to £7,000 of kit is a serious investment for a small studio, and it’s there so nothing holds the work back. But the best laser in the world can’t decide what makes your dog look like your dog. Knowing what to burn, where, and how dark is the part that turns a photo into something that means something. That part is me.

Curious what this could do with your photo?

No commitment and no payment at this stage.